Tag Archives: gear worm motor

China manufacturer Worm Gear Motor with Electric Motor for Single Axis Solar Tracker System car motor

Product Description

high quality solar tracker slewing gear slewing drive worm gear for satellite antenna and satellite PV CPV solar tracking system
 

Model

SC3

Place of Origin

HangZhou,China

Brand

Coresun Drive

Load Weight

50-200kg

IP Class

IP65

Output Torque

760N.m

Tilting Moment Torque

1.1kN.m

Holding Torque

2.2kN.m

Precision

0.17°

Rated current

≤2.9A 

Gear Ratio

62:1

Efficiency

40%

Slewing Drive is also called slewing gear, worm gear, worm drive, rotary drive, slew drive, worm gear reducer and rotary drive unit. At present the majority of such devices are caller Slewing Drive.
Coresun Slewing Drive movement can reduce power consumption, since the security role. In addition to the field of use in the daily solar power systems are usually used for Special vehicle, heavy-duty flat-panel truck, container cranes, truck mounted crane, automobile crane and aerial vehicles, cranes, gantry cranes, small wind power stations, space communications, satellite receiver, etc. . The Slewing Drive in the solar photovoltaic industry, the general configuration DC planetary reduction motor or AC geared motors; main configuration of the hydraulic motor as a power-driven construction machinery
Coresun Slewing Drive principle of the large transmission ratio of the deceleration device to transmit motion and power between the 2 axes staggered in space. The Slewing Drive transmission is usually the case of the main components of the worm and wheel bearings, shell, and the power source
As the core component of turntable bearings, can withstand the axial load, radial load and overturning moment. 

SC3 Slewing Drive Worm Gear Mechanism Characteristics:

High Tilting Moment Torque
Tilting moment torque is the moment to CZPT a self-propelled mechanical overturning.Working load (lifting load in the crane) or partial load outside the tilting line, relative torque formed by the tilting line.

High Holding Torque
Holding torque is typically higher than running torque, and is limited primarily by the maximum current the motor can withstand. From a practical standpoint, holding torque is the sum of the magnetic force exerted by the coils to hold the motor’s current position, plus the detent torque.

High Output Torque
Divide the diameter of the output gear by the diameter of the input gear. Multiply the torque of the motor by the gear ratio to get the output torque. For example, a motor that puts out 10 lb.-feet of torque used with a gear reducer with a 10:1 gear ratio will give you 100 lb.-feet of torque at the output gear.
 

High Protection Grade
IP65, IP66 waterproof and dustproof performance for outdoor using condition

Production Photo and Application

Coresun Drive processes the metallographic analysis to ensure the quality of parts- worm shaft, slewing gear,slewing bearing and 100% finished product inspection.

slewing drive worm gear with 24VDC 12VDC motor is certificated by CE

CONTACT US

It is sincerely looking forward to cooperating with you for and providing you the best quality product & service with all of our heart!

 

Weight: 12kg
Delivery Time: 7 Days
Mounting Holes: 100mm
Gear Ratio: 62:1
Output Speed: 0.048rpm
Output Torque: 760n.M
Customization:
Available

|

Customized Request

Motor

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China manufacturer Worm Gear Motor with Electric Motor for Single Axis Solar Tracker System   car motor		China manufacturer Worm Gear Motor with Electric Motor for Single Axis Solar Tracker System   car motor
editor by CX 2023-10-19

China XYT 5840-31ZY High Torque Low Rpm 12v 24v 70kg.cm Brush Electric Gear Motor Worm Geared Dc Motor with encoder motor engine

Guarantee: 3years
Design Quantity: 5840-31ZY with encoder
Use: BOAT, Automobile, Electric powered Bicycle, Enthusiast, Home Equipment, Cosmetic instrument, Original 200V AC servo motor driver Yaskawa sigma7 sigma 7 SGM7A SGM7G servomotor Wise Residence
Type: Equipment MOTOR
Torque: 2.7- 70kg.cm
Design: Everlasting Magnet
Commutation: Brush
Defend Attribute: Drip-proof
Speed(RPM): 5 to 470 R/Min
Constant Recent(A): 300mA
Efficiency: IE one
Motor Variety: Dc Brush Equipment Motor
Gearbox substance: Zinc alloy
Motor Diameter: 115x40mm
Rotor: 100% Copper Wire
Gear Materials: All metallic equipment
Output Shaft Diameter: 8mm (D-Sort)
Output Shaft Length: 15mm
Motor model: 31ZY Metal Tube PMDC Motor
Shaft Content: 416# steel
Item Name: 5840-31ZY Black Worm equipment motor
Packaging Information: 1. Shockproof foam packing2. Appropriate carton measurement

Products Description

BrandXinyongtai /Customer’s Brand name
Model5840-31ZY D8 with encoder
NameDC Geared Motor
Voltage12V / 24V
Power20W
No-load Pace5-470RPM
Electric Recent300mA
Product Shaft Size14.5MM
Maximum Torque70KG.CM
Weight360g(APPROX)
Whether to adjust the speedYes
Whether ahead or reverseYes
Motor Model:5840-31ZY
Rated Voltage 12V 31ZY-1280
ReducerReduction ratio (adjust)173150100200290500670
No loadSpeed (RPM)4702601608040271612
Current (A)0.three0.30.three0.30.30.three0.three0.three
Load TorqueSpeed (RPM)380200130603020129
Current (A)11111111
Torque (KG.CM)2.seven5.8.16.32.46.70.70.
Power (W)19.two19.219.two19.two19.two19.219.219.2
StallTorque (KG.CM)5.three10.413.625.six47.270.Forbidden Stall
Current (A)6.five6.five6.five6.56.56.56.five6.five
Rated Voltage 24V 31ZY-2480
ReducerReduction ratio (alter)173150100200290500670
No loadSpeed (RPM)4702601608040271612
Current (A)0.20.20.two0.two0.20.20.20.two
Load TorqueSpeed (RPM)380200130603020129
Current (A)0.seven0.seven0.70.seven0.70.70.70.seven
Torque (KG.CM)2.75.8.16.32.46.70.70
Power (W)28.eight28.828.828.eight28.828.828.eight28.eight
StallTorque (KG.CM)5.310.four13.six25.647.two70Forbidden Stall
Current (A)4.four4.44.44.44.44.44.44.4
More Datasheet , JUST Speak to US .
5840-31ZY Product Depth Composition Maker kindly recommendation1) If the load far more than the rated torque, the motor will be ruined.2) If you link the voltage less than the rated voltage, the rated torque will be lowered.3) Please notify us real load ,so we can select the greatest match torque motor for you . If you are using the item usually, 220v 3000rm vibrating display screen motor 380V concrete vibrator motor1kw 1.5Kw 3 kw CVM AC DC vibration motor the torque does not exceed the rated torque.Motor life: 10,000 several hoursGearbox life: 2000 hours More Goods Application of product Why Pick US? Certifications Company Profile Overview & Contact FAQ Q1: Are you a Producer or a Investing Company? A:We are a skilled producer with over eleven many years of expertise, and have a comprehensive provide chain from parts processing to finished merchandise. Q2: How is your Good quality Handle? A: We have professional examining employees on every creation line procedure. Soon after ending the whole motor, we have the total good quality equipment to examination the motor. This sort of as Hardness Tester, 2.5D Graphic Tester, twelve inch Plastic Locking Collar Plastic Shaft Collar Salt Spray Chamber, Existence Tester, Temperature Check Equipment, and Noise tester etc. Q3: How about Sample order? A: Sample is accessible for you. please speak to us for specifics. Once we cost you sample fee,you should really feel simple, it would be refund when you area official buy.This autumn: How prolonged is the generating and shipping and delivery? A: 1. Shipping timedepends on the amount you get. typically it normally takes 7-fifteen doing work times. 2. Normal kind products can be shipped inside of 3 workingdays, MINAS A6 Sequence AC Servo Motor with Servo Drive and other personalized samples can be transported within 7-ten operating times. Q5: When will you reply soon after obtained my inquiries? A: Ourcustomer services is on the internet 24 hrs, searching ahead to your inquiry.

The Basics of a Planetary Motor

A Planetary Motor is a type of gearmotor that uses multiple planetary gears to deliver torque. This system minimizes the chances of failure of individual gears and increases output capacity. Compared to the planetary motor, the spur gear motor is less complex and less expensive. However, a spur gear motor is generally more suitable for applications requiring low torque. This is because each gear is responsible for the entire load, limiting its torque.

Self-centering planetary gears

This self-centering mechanism for a planetary motor is based on a helical arrangement. The helical structure involves a sun-planet, with its crown and slope modified. The gears are mounted on a ring and share the load evenly. The helical arrangement can be either self-centering or self-resonant. This method is suited for both applications.
A helical planetary gear transmission is illustrated in FIG. 1. A helical configuration includes an output shaft 18 and a sun gear 18. The drive shaft extends through an opening in the cover to engage drive pins on the planet carriers. The drive shaft of the planetary gears can be fixed to the helical arrangement or can be removable. The transmission system is symmetrical, allowing the output shaft of the planetary motor to rotate radially in response to the forces acting on the planet gears.
A flexible pin can improve load sharing. This modification may decrease the face load distribution, but increases the (K_Hbeta) parameter. This effect affects the gear rating and life. It is important to understand the effects of flexible pins. It is worth noting that there are several other disadvantages of flexible pins in helical PGSs. The benefits of flexible pins are discussed below.
Using self-centering planetary gears for a helical planetary motor is essential for symmetrical force distribution. These gears ensure the symmetry of force distribution. They can also be used for self-centering applications. Self-centering planetary gears also guarantee the proper force distribution. They are used to drive a planetary motor. The gearhead is made of a ring gear, and the output shaft is supported by two ball bearings. Self-centering planetary gears can handle a high torque input, and can be suited for many applications.
To solve for a planetary gear mechanism, you need to find its pitch curve. The first step is to find the radius of the internal gear ring. A noncircular planetary gear mechanism should be able to satisfy constraints that can be complex and nonlinear. Using a computer, you can solve for these constraints by analyzing the profile of the planetary wheel’s tooth curve.
Motor

High torque

Compared to the conventional planetary motors, high-torque planetary motors have a higher output torque and better transmission efficiency. The high-torque planetary motors are designed to withstand large loads and are used in many types of applications, such as medical equipment and miniature consumer electronics. Their compact design makes them suitable for small space-saving applications. In addition, these motors are designed for high-speed operation.
They come with a variety of shaft configurations and have a wide range of price-performance ratios. The FAULHABER planetary gearboxes are made of plastic, resulting in a good price-performance ratio. In addition, plastic input stage gears are used in applications requiring high torques, and steel input stage gears are available for higher speeds. For difficult operating conditions, modified lubrication is available.
Various planetary gear motors are available in different sizes and power levels. Generally, planetary gear motors are made of steel, brass, or plastic, though some use plastic for their gears. Steel-cut gears are the most durable, and are ideal for applications that require a high amount of torque. Similarly, nickel-steel gears are more lubricated and can withstand a high amount of wear.
The output torque of a high-torque planetary gearbox depends on its rated input speed. Industrial-grade high-torque planetary gearboxes are capable of up to 18000 RPM. Their output torque is not higher than 2000 nm. They are also used in machines where a planet is decelerating. Their working temperature ranges between 25 and 100 degrees Celsius. For best results, it is best to choose the right size for the application.
A high-torque planetary gearbox is the most suitable type of high-torque planetary motor. It is important to determine the deceleration ratio before buying one. If there is no product catalog that matches your servo motor, consider buying a close-fitting high-torque planetary gearbox. There are also high-torque planetary gearboxes available for custom-made applications.
Motor

High efficiency

A planetary gearbox is a type of mechanical device that is used for high-torque transmission. This gearbox is made of multiple pairs of gears. Large gears on the output shaft mesh with small gears on the input shaft. The ratio between the big and small gear teeth determines the transmittable torque. High-efficiency planetary gearheads are available for linear motion, axial loads, and sterilizable applications.
The AG2400 high-end gear unit series is ideally matched to Beckhoff’s extensive line of servomotors and gearboxes. Its single-stage and multi-stage transmission ratios are highly flexible and can be matched to different robot types. Its modified lubrication helps it operate in difficult operating conditions. These high-performance gear units are available in a wide range of sizes.
A planetary gear motor can be made of steel, nickel-steel, or brass. In addition to steel, some models use plastic. The planetary gears share work between multiple gears, making it easy to transfer high amounts of power without putting a lot of stress on the gears. The gears in a planetary gear motor are held together by a movable arm. High-efficiency planetary gear motors are more efficient than traditional gearmotors.
While a planetary gear motor can generate torque, it is more efficient and cheaper to produce. The planetary gear system is designed with all gears operating in synchrony, minimizing the chance of a single gear failure. The efficiency of a planetary gearmotor makes it a popular choice for high-torque applications. This type of motor is suitable for many applications, and is less expensive than a standard geared motor.
The planetary gearbox is a combination of a planetary type gearbox and a DC motor. The planetary gearbox is compact, versatile, and efficient, and can be used in a wide range of industrial environments. The planetary gearbox with an HN210 DC motor is used in a 22mm OD, PPH, and ph configuration with voltage operating between 6V and 24V. It is available in many configurations and can be custom-made to meet your application requirements.
Motor

High cost

In general, planetary gearmotors are more expensive than other configurations of gearmotors. This is due to the complexity of their design, which involves the use of a central sun gear and a set of planetary gears which mesh with each other. The entire assembly is enclosed in a larger internal tooth gear. However, planetary motors are more effective for higher load requirements. The cost of planetary motors varies depending on the number of gears and the number of planetary gears in the system.
If you want to build a planetary gearbox, you can purchase a gearbox for the motor. These gearboxes are often available with several ratios, and you can use any one to create a custom ratio. The cost of a gearbox depends on how much power you want to move with the gearbox, and how much gear ratio you need. You can even contact your local FRC team to purchase a gearbox for the motor.
Gearboxes play a major role in determining the efficiency of a planetary gearmotor. The output shafts used for this type of motor are usually made of steel or nickel-steel, while those used in planetary gearboxes are made from brass or plastic. The former is the most durable and is best for applications that require high torque. The latter, however, is more absorbent and is better at holding lubricant.
Using a planetary gearbox will allow you to reduce the input power required for the stepper motor. However, this is not without its downsides. A planetary gearbox can also be replaced with a spare part. A planetary gearbox is inexpensive, and its spare parts are inexpensive. A planetary gearbox has low cost compared to a planetary motor. Its advantages make it more desirable in certain applications.
Another advantage of a planetary gear unit is the ability to handle ultra-low speeds. Using a planetary gearbox allows stepper motors to avoid resonance zones, which can cause them to crawl. In addition, the planetary gear unit allows for safe and efficient cleaning. So, whether you’re considering a planetary gear unit for a particular application, these gear units can help you get exactly what you need.

China XYT 5840-31ZY High Torque Low Rpm 12v 24v 70kg.cm Brush Electric Gear Motor Worm Geared Dc Motor with encoder     motor engine	China XYT 5840-31ZY High Torque Low Rpm 12v 24v 70kg.cm Brush Electric Gear Motor Worm Geared Dc Motor with encoder     motor engine
editor by czh 2023-02-21

China The Best China High Torque 370 6mm 12v 24v dc worm gear motor with Long Lifespan dc motor

Model Number: SRB-GW370-Single Screw Gap
Utilization: BOAT, Automobile, Property Equipment, Robots, nest devices, gaming and enjoyment products, wise products
Kind: DC Worm Gear Motor
Torque: 2.5(NM)
Construction: Everlasting Magnet
Commutation: Brush
Protect Attribute: Drip-evidence
Velocity(RPM): 4~210(rpm)
Steady Existing(A): .3A
Effectiveness: IE one
Product Name: SRB-GW370-Single Screw Gap
Motor Variety: Brushed DC Motor
Reducer Dimension: 46mm*32mm
Reducer Shaft Size: 14mm
Reducer Shaft Diameter: 6mm
Reducer Shaft Kind: D-Shaft(Milling edge 1.5mm)
Fat: 150g
Substance: Stainless Steel
Feature1: Self-locking perform, CW/CCW
Feature2: Prolonged existence, minimal sound, large torque, stable and reputable efficiency
Certification: ce, RoHS
Packaging Particulars: 1. Regular carton packaging. 2. Use EPS foam or EPE cotton within the carton.
Port: HangZhou

Brand SRIBO
Merchandise Quantity SRB-GW370 One Screw Gap
Content Stainless Steel
Voltage three~24V
Speed 4~210rpm
Torque 2.5Nm
Reducer Dimension 46mm*32mm
Application Sensible car, sensible home, automated curtain
Functions Adjustable speed,Self-locking purpose, CW/CCW
Other Shaft, speed, voltage can be customized

Produts Display
Motor assortment meth
ApplicationFrequent programs:
1. Household programs: white items, tiny appliances, supporters, electric screens, computerized window opening, floor cleaning robots, vacuum cleaners, intelligent house systems.
two. Medical apps: health care pumps, sphygmomanometers, surgical equipment, medical agitators, centrifuges.
3. Energy resources: air pump, drinking water pump, vacuum pump, oxygen generator, electric drill, electric screwdriver.
4. Commercial gear: printers, copiers, shredders, projectors, scanners, Aluminum double shaft collar break up clamping stainless metal pipe collar money registers, vending equipment.
5. Personal treatment: hair dryer, electrical shaver, beauty solution, hair roller, steam hair straightener (water jet straight hair outlet).
six. CZPT field: massager, adult toy.
seven. Safety discipline: surveillance program, digital camera, protected.
eight. Industrial apps: robotic arms, printing tools, automation tools.
nine. Other programs: digital door locks, wise switches, robots, toys, wise autos, boats, clever use, electronics, Do-it-yourself, and many others.

Discover:
Hello, I am really satisfied to see our merchandise. We are professional motor OEM/ODM companies, and have virtually 11 years of production and R&D encounter. We have our personal factory and complex engineers. We are found in HangZhou, China, If you are fascinated in our merchandise, there are any motor customization wants, welcome to get in touch with us, our skilled services to solution your concerns.

Business Info

Packaging & Shipping
FAQ FAQ

Q1: Are you a Company or a Investing Business ?
A:We are a specialist producer with in excess of eleven years of encounter, and have a complete source chain from elements processing to concluded merchandise.

Q2: What’re your main products ?
A: The main productions are: Brush dc motor, Brushless dc motor, Spur gear motor, Micro motor, Vibration motor, Turbo worm geared motors, Geared motors with Corridor encoders, Planetary geared motors, Micro pump motors, SF10 Lathe Cnc Machining Extended Shaft Linear Crank Method Sensible automobile motor sets, Speed reducers, Speed controllers, Power adapters, Switches Power supply and associated motor areas. Other sorts of motors, you should make contact with client provider for customization.

Q3: How is your Good quality Manage ?
A: We have specialist examining employees on every single generation line procedure. After finishing the complete motor, we have the total high quality machine to test the motor. Such as Hardness Tester, 2.5D Graphic Tester, Salt Spray Chamber, Existence Tester, Temperature Examination Device, and Sounds tester etc.

This autumn: How to buy ?
A: Ship Us Inquiry → Receive Our Quotation → Negotiate Details → Confirm The Sample → Indication Contract/Deposit → Mass Production →Cargo Completely ready → Stability/Shipping and delivery → Even more Cooperation

Q5: How about Sample purchase ?A: Sample is available for you. please contact us for specifics. As soon as we cost you sample fee, make sure you truly feel straightforward, it would be refund when you area official buy.
Q6: How prolonged is the produce[Creating] and transport ?
A: 1. Deliver time depends on the amount you order. typically it will take fifteen-25 functioning days.
2. Regular type merchandise can be transported in 3 functioning days, and other custom-made samples can be shipped within 7-10 working days.

Q7: Which transport way is available ?A: one. DHL, UPS, FedEx, TNT, EMS, Sea are available. The other shipping and delivery ways are also available, please speak to us if you want ship by the other transport way. 2. For samples and offers significantly less than 100kg, we normally suggest specific shipping and delivery For weighty deals, we usually advise air delivery or sea delivery. But it all relies upon on our customers’ requirements.

Q8. What is your terms of Payments ?
A: 1. Alibaba Trade Assurance. Any trade disputes, alibaba will ensure your money and compensate all of your reduction.
2. T/T: 50% deposit initial, and fifty% equilibrium ahead of the delivery. we will present you the images or films of the merchandise and the packings prior to you pay the equilibrium.
3. Western Union, Funds Gram, Visa, Learn card recognized. Other payment methods are also available, please speak to us before payment.

Q9: When will you reply after got my inquiries ?
A: Our buyer services is online 24 hours, DC motor 24V 50mm stroke 1500N load 8mms electrical linear actuator with reduced sounds hunting ahead to your inquiry.

Benefits of a Planetary Motor

Besides being one of the most efficient forms of a drive, a Planetary Motor also offers a great number of other benefits. These features enable it to create a vast range of gear reductions, as well as generate higher torques and torque density. Let’s take a closer look at the benefits this mechanism has to offer. To understand what makes it so appealing, we’ll explore the different types of planetary systems.
Motor

Solar gear

The solar gear on a planetary motor has two distinct advantages. It produces less noise and heat than a helical gear. Its compact footprint also minimizes noise. It can operate at high speeds without sacrificing efficiency. However, it must be maintained with constant care to operate efficiently. Solar gears can be easily damaged by water and other debris. Solar gears on planetary motors may need to be replaced over time.
A planetary gearbox is composed of a sun gear and two or more planetary ring and spur gears. The sun gear is the primary gear and is driven by the input shaft. The other two gears mesh with the sun gear and engage the stationary ring gear. The three gears are held together by a carrier, which sets the spacing. The output shaft then turns the planetary gears. This creates an output shaft that rotates.
Another advantage of planetary gears is that they can transfer higher torques while being compact. These advantages have led to the creation of solar gears. They can reduce the amount of energy consumed and produce more power. They also provide a longer service life. They are an excellent choice for solar-powered vehicles. But they must be installed by a certified solar energy company. And there are other advantages as well. When you install a solar gear on a planetary motor, the energy produced by the sun will be converted to useful energy.
A solar gear on a planetary motor uses a solar gear to transmit torque from the sun to the planet. This system works on the principle that the sun gear rotates at the same rate as the planet gears. The sun gear has a common design modulus of -Ns/Np. Hence, a 24-tooth sun gear equals a 3-1/2 planet gear ratio. When you consider the efficiency of solar gears on planetary motors, you will be able to determine whether the solar gears are more efficient.

Sun gear

The mechanical arrangement of a planetary motor comprises of two components: a ring gear and a sun gear. The ring gear is fixed to the motor’s output shaft, while the sun gear rolls around and orbits around it. The ring gear and sun gear are linked by a planetary carrier, and the torque they produce is distributed across their teeth. The planetary structure arrangement also reduces backlash, and is critical to achieve a quick start and stop cycle.
When the two planetary gears rotate independently, the sun gear will rotate counterclockwise and the ring-gear will turn in the same direction. The ring-gear assembly is mounted in a carrier. The carrier gear and sun gear are connected to each other by a shaft. The planetary gears and sun gear rotate around each other on the ring-gear carrier to reduce the speed of the output shaft. The planetary gear system can be multiplied or staged to obtain a higher reduction ratio.
A planetary gear motor mimics the planetary rotation system. The input shaft turns a central gear, known as the sun gear, while the planetary gears rotate around a stationary sun gear. The motor’s compact design allows it to be easily mounted to a vehicle, and its low weight makes it ideal for small vehicles. In addition to being highly efficient, a planetary gear motor also offers many other benefits.
A planetary gearbox uses a sun gear to provide torque to the other gears. The planet pinions mesh with an internal tooth ring gear to generate rotation. The carrier also acts as a hub between the input gear and output shaft. The output shaft combines these two components, giving a higher torque. There are three types of planetary gearboxes: the sun gear and a wheel drive planetary gearbox.
Motor

Planetary gear

A planetary motor gear works by distributing rotational force along a separating plate and a cylindrical shaft. A shock-absorbing device is included between the separating plate and cylindrical shaft. This depressed portion prevents abrasion wear and foreign particles from entering the device. The separating plate and shaft are positioned coaxially. In this arrangement, the input shaft and output shaft are rotated relative to one another. The rotatable disc absorbs the impact.
Another benefit of a planetary motor gear is its efficiency. Planetary motor gears are highly efficient at transferring power, with 97% of the input energy being transferred to the output. They can also have high gear ratios, and offer low noise and backlash. This design also allows the planetary gearbox to work with electric motors. In addition, planetary gears also have a long service life. The efficiency of planetary gears is due in part to the large number of teeth.
Other benefits of a planetary motor gear include the ease of changing ratios, as well as the reduced safety stock. Unlike other gears, planetary gears don’t require special tools for changing ratios. They are used in numerous industries, and share parts across multiple sizes. This means that they are cost-effective to produce and require less safety stock. They can withstand high shock and wear, and are also compact. If you’re looking for a planetary motor gear, you’ve come to the right place.
The axial end surface of a planetary gear can be worn down by abrasion with a separating plate. In addition, foreign particles may enter the planetary gear device. These particles can damage the gears or even cause noise. As a result, you should check planetary gears for damage and wear. If you’re looking for a gear, make sure it has been thoroughly tested and installed by a professional.

Planetary gearbox

A planetary motor and gearbox are a common combination of electric and mechanical power sources. They share the load of rotation between multiple gear teeth to increase the torque capacity. This design is also more rigid, with low backlash that can be as low as one or two arc minutes. The advantages of a planetary gearmotor over a conventional electric motor include compact size, high efficiency, and less risk of gear failure. Planetary gear motors are also more reliable and durable than conventional electric motors.
A planetary gearbox is designed for a single stage of reduction, or a multiple-stage unit can be built with several individual cartridges. Gear ratios may also be selected according to user preference, either to face mount the output stage or to use a 5mm hex shaft. For multi-stage planetary gearboxes, there are a variety of different options available. These include high-efficiency planetary gearboxes that achieve a 98% efficiency at single reduction. In addition, they are noiseless, and reduce heat loss.
A planetary gearbox may be used to increase torque in a robot or other automated system. There are different types of planetary gear sets available, including gearboxes with sliding or rolling sections. When choosing a planetary gearset, consider the environment and other factors such as backlash, torque, and ratio. There are many advantages to a planetary gearbox and the benefits and drawbacks associated with it.
Planetary gearboxes are similar to those in a solar system. They feature a central sun gear in the middle, two or more outer gears, and a ring gear at the output. The planetary gears rotate in a ring-like structure around a stationary sun gear. When the gears are engaged, they are connected by a carrier that is fixed to the machine’s shaft.
Motor

Planetary gear motor

Planetary gear motors reduce the rotational speed of an armature by one or more times. The reduction ratio depends on the structure of the planetary gear device. The planetary gear device has an output shaft and an armature shaft. A separating plate separates the two. The output shaft moves in a circular pattern to turn the pinion 3. When the pinion rotates to the engagement position, it is engaged with the ring gear 4. The ring gear then transmits the rotational torque to the armature shaft. The result is that the engine cranks up.
Planetary gear motors are cylindrical in shape and are available in various power levels. They are typically made of steel or brass and contain multiple gears that share the load. These motors can handle massive power transfers. The planetary gear drive, on the other hand, requires more components, such as a sun’s gear and multiple planetary gears. Consequently, it may not be suitable for all types of applications. Therefore, the planetary gear drive is generally used for more complex machines.
Brush dusts from the electric motor may enter the planetary gear device and cause it to malfunction. In addition, abrasion wear on the separating plate can affect the gear engagement of the planetary gear device. If this occurs, the gears will not engage properly and may make noise. In order to prevent such a situation from occurring, it is important to regularly inspect planetary gear motors and their abrasion-resistant separating plates.
Planetary gear motors come in many different power levels and sizes. These motors are usually cylindrical in shape and are made of steel, brass, plastic, or a combination of both materials. A planetary gear motor can be used in applications where space is an issue. This motor also allows for low gearings in small spaces. The planetary gearing allows for large amounts of power transfer. The output shaft size is dependent on the gear ratio and the motor speed.

China The Best China High Torque 370 6mm 12v 24v dc worm gear motor with Long Lifespan     dc motor	China The Best China High Torque 370 6mm 12v 24v dc worm gear motor with Long Lifespan     dc motor
editor by czh 2023-02-21

China High torque electric motor drive bldc worm gear dc motor motorbase

Warranty: 3 months
Product Variety: TWG4058-TEC3650
Usage: BOAT, Vehicle, Electric powered Bicycle, Property Equipment, Beauty instrument, Sensible House, Industrial products
Kind: Equipment MOTOR
Torque: 10kg.cm
Development: Permanent Magnet
Commutation: Brushless
Shield Feature: Totally Enclosed
Speed(RPM): 5-150rpm
Continuous Current(A): 420-1400mA
Efficiency: Ie 3
Dimension: 4058 with 3650 motor
Product Title: dc gear motor
Normal Programs: Automobile Products
Motor type: BLDC Brushless Motor
Shaft diameter: 8MM-D or Custom-made
Equipment Kind: Metal worm gearbpx
Equipment Material: Metallic Gears
Attribute: Proper angle
Fat: 360g
Sounds: 30cm.40-50db
Packaging Particulars: CZPT unique pacakge
Port: HangZhou,HK

Product Pictures Solution Paramenters Packaging & Shipping

TWG4058-TEC3650
Case Pack(pcs)Carton SizeCarton Gross Excess weight
4536.5*26.5*29 CM19.5kg
Reviews
Other Applications:
Business Machines:ATM, Copiers and Scanners, 12V 24V 36V 48V 40A 2000W PWM DC Motor Pace Controller Adjustable Variable pace Change CZPT Driver electrical motor controller Currency Dealing with, Stage of Sale, Printers, Vending Devices.
Food and Beverage:Beverage Dispensing, Hand Blenders, Blenders, Mixers, Coffee Machines, Meals Processors, Juicers, 45kw 55kw 75kw 90kw substantial performance 380V 3000rpm PMAC 200Hz Variable Frequency VFD ev vehicle motor Fryers, Ice Makers, Soy Bean MilkMakers.
Camera and Optical:Video, Cameras, Projectors.
Lawn and Garden:Lawn Mowers, Snow Blowers, Trimmers, Leaf Blowers.
MedicalMesotherapy,insulin pump,clinic bed, 3-24V Gradual Pace Motor 1-200rpm Substantial Torque DC Flat Equipment Motor For Valve Urine Analyzer,
Certifications Our Buyers Business Profile TT MOTORTT Motor (HK) Industrial Co., Ltd. has been specializing in micro motors, equipment motors and their respective components because 2000.Our merchandise are broadly utilized in entertainment systems, cars, home and industrial appliances and tools and numerous other individuals. Ourproducts are dependable and extended-lasting, and backed by a long time of encounter. We export 98% of our output globally. By leveraging our tough-received reputation for honesty, dependability and high quality, TT aims to proceed as a pioneer in the salesoverseas by looking for global associates. If your firm is an conclude-consumer of micro-motors, a distributor or an agent, asynchronous oven motor make sure you speak to us.We appear forward to getting CZPT to function jointly with you in the close to potential.

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China High torque electric motor drive bldc worm gear dc motor     motorbaseChina High torque electric motor drive bldc worm gear dc motor     motorbase
editor by czh 2023-02-19

China Electric 12 Volt DC 30-600rpm Transmission Worm Geared Gearbox Gear Reducer Motor motor brushes

Warranty: 3months-1year, 2 Calendar year
Design Variety: 42HS3418
Section: two
Kind: Hybrid, Reduction Motor
Recent / Section: 1.5A
Material: pure copper
Item identify: Worm Gear Reducer
Greatest allowable radial load: 1350N
optimum allowable shaft load: 270N
Backlash (Without Load): fifteen-eighteen
Packaging Information: Water-resistant membrane 720 820 Quadcopter Large Speed Micro Mini Motor Model Airplane has a full quality administration program, has received ISO9001, CE, RoHs and other associated certifications, and holds a number of electrical patent certificates. “Concentration, Professionalism, Concentration” in the field of automation of motor R&D and system handle answers is the company’s organization goal. “Be your most dependable spouse” is the firm’s support philosophy. We have constantly been aiming to “make first-class goods with professional technologies”, hold tempo with the instances, innovate constantly, and supply far more consumers with far better items and providers. FAQ 1. who are we?We are primarily based in ZheJiang , Ac servo motor price tag 67kw 50kw 45kw 37kw 30kw 20kw 15kw 12kw 11kw 10kw China, start from 2016,market to North America(21.10%),Western Europe(20.sixty%),Japanese Europe(11.30%),Southern Europe(11.twenty%),Oceania(5.70%),Southeast Asia(5.40%),Mid East(5.30%),Northern Europe(4.thirty%),Central The usa(3.70%),Domestic Industry(3.50%),Eastern Asia(2.sixty%),Africa(2.50%),South America(1.fifty%),South Asia(1.thirty%). There are whole about 101-200 individuals in our place of work.2. how can we ensure top quality?Often a pre-manufacturing sample just before mass productionAlways last Inspection before shipment3.what can you buy from us?Stepper motor,servo motor, 3kw 15kw 20kw 30kw 50kw 100kw 200kw 100hp 200hp 300hp traction motor for electrical motor vehicle electric powered bus electrical truck planetary gearbox,equipment motor,AC motor4. why need to you purchase from us not from other suppliers?ZheJiang CZPT Technology Co.Ltd is a built-in substantial-tech company which contains the analysis and improvement,production ,revenue and trade.With a team of experienced personnel, who have far more than 20 many years advancement expertise.5. what services can we provide?Accepted Supply Phrases: FOB,CFR,CIF,EXW,FCA,CPT,Convey Delivery;Accepted Payment Forex:USD,EUR,CNYAccepted Payment Variety: T/T,L/C,PayPal,Western Union, Customized 200W Electrical Nebulizer Motor spare areas Water-proof piston compressor nebulizer motor CashLanguage Spoken:English,Chinese

The Benefits of Using a Gear Motor

A gear motor works on the principle of conservation of angular momentum. As the smaller gear covers more RPM and the larger gear produces more torque, the ratio between the two is greater than one. Similarly, a multiple gear motor follows the principle of energy conservation, with the direction of rotation always opposite to the one that is adjacent to it. It’s easy to understand the concept behind gear motors and the various types available. Read on to learn about the different types of gears and their applications.

Electric motor

The choice of an electric motor for gear motor is largely dependent on the application. There are various motor and gearhead combinations available, and some are more efficient than others. However, it is critical to understand the application requirements and select a motor that meets these needs. In this article, we’ll examine some of the benefits of using a gear motor. The pros and cons of each type are briefly discussed. You can buy new gear motors at competitive prices, but they aren’t the most reliable or durable option for your application.
To determine which motor is best for your application, you’ll need to consider the load and speed requirements. A gear motor’s efficiency (e) can be calculated by taking the input and output values and calculating their relation. On the graph below, the input (T) and output (P) values are represented as dashed lines. The input (I) value is represented as the torque applied to the motor shaft. The output (P) is the amount of mechanical energy converted. A DC gear motor is 70% efficient at 3.75 lb-in / 2,100 rpm.
In addition to the worm gear motor, you can also choose a compact DC worm gear motor with a variable gear ratio from 7.5 to 80. It has a range of options and can be custom-made for your specific application. The 3-phase AC gear motor, on the other hand, works at a rated power of one hp and torque of 1.143.2 kg-m. The output voltage is typically 220V.
Another important factor is the output shaft orientation. There are two main orientations for gearmotors: in-line and offset. In-line output shafts are most ideal for applications with high torque and short reduction ratios. If you want to avoid backlash, choose a right angle output shaft. An offset shaft can cause the output shaft to become excessively hot. If the output shaft is angled at a certain angle, it may be too large or too small.
Motor

Gear reducer

A gear reducer is a special kind of speed reducing motor, usually used in large machinery, such as compressors. These reducers have no cooling fan and are not designed to handle heavy loads. Different purposes require different service factors. For instance, a machine that requires frequent fast accelerations and occasional load spikes needs a gear reducer with a high service factor. A gear reducer that’s designed for long production shifts should be larger than a machine that uses it for short periods of time.
A gear reducer can reduce the speed of a motor by a factor of two. The reduction ratio changes the rotation speed of the receiving member. This change in speed is often required to solve problems of inertia mismatch. The torque density of a gear reducer is measured in newton meters and will depend on the motor used. The first criterion is the configuration of the input and output shafts. A gear ratio of 2:1, for example, means that the output speed has been cut in half.
Bevel gear reducers are a good option if the input and output shafts are perpendicular. This type is very robust and is perfect for situations where the angle between two axes is small. However, bevel gear reducers are expensive and require constant maintenance. They are usually used in heavy-duty conveyors and farm equipment. The correct choice of gear reducer for gear motor is crucial for the efficiency and reliability of the mechanism. To get the best gear reducer for your application, talk to a qualified manufacturer today.
Choosing a gear reducer for a gear motor can be tricky. The wrong one can ruin an entire machine, so it’s important to know the specifics. You must know the torque and speed requirements and choose a motor with the appropriate ratio. A gear reducer should also be compatible with the motor it’s intended for. In some cases, a smaller motor with a gear reducer will work better than a larger one.
Motor

Motor shaft

Proper alignment of the motor shaft can greatly improve the performance and life span of rotating devices. The proper alignment of motors and driven instruments enhances the transfer of energy from the motor to the instrument. Incorrect alignment leads to additional noise and vibration. It may also lead to premature failure of couplings and bearings. Misalignment also results in increased shaft and coupling temperatures. Hence, proper alignment is critical to improve the efficiency of the driven instrument.
When choosing the correct type of gear train for your motor, you need to consider its energy efficiency and the torque it can handle. A helical geared motor is more efficient for high output torque applications. Depending on the required speed and torque, you can choose between an in-line and a parallel helical geared motor. Both types of gears have their advantages and disadvantages. Spur gears are widespread. They are toothed and run parallel to the motor shaft.
A planetary gear motor can also have a linear output shaft. A stepping motor should not operate at too high current to prevent demagnetization, which will lead to step loss or torque drop. Ensure that the motor and gearbox output shafts are protected from external impacts. If the motor and gearbox are not protected against bumps, they may cause thread defects. Make sure that the motor shafts and rotors are protected from external impacts.
When choosing a metal for your gear motor’s motor shaft, you should consider the cost of hot-rolled bar stock. Its outer layers are more difficult to machine. This type of material contains residual stresses and other problems that make it difficult to machine. For these applications, you should choose a high-strength steel with hard outer layers. This type of steel is cheaper, but it also has size considerations. It’s best to test each material first to determine which one suits your needs.
In addition to reducing the speed of your device, a geared motor also minimizes the torque generated by your machine. It can be used with both AC and DC power. A high-quality gear motor is vital for stirring mechanisms and conveyor belts. However, you should choose a geared motor that uses high-grade gears and provides maximum efficiency. There are many types of planetary gear motors and gears on the market, and it’s important to choose the right one.
Motor

First stage gears

The first stage gears of a gear motor are the most important components of the entire device. The motor’s power transmission is 90% efficient, but there are many factors that can affect its performance. The gear ratios used should be high enough to handle the load, but not too high that they are limiting the motor’s speed. A gear motor should also have a healthy safety factor, and the lubricant must be sufficient to overcome any of these factors.
The transmission torque of the gear changes with its speed. The transmission torque at the input side of the gear decreases, transferring a small torque to the output side. The number of teeth and the pitch circle diameters can be used to calculate the torque. The first stage gears of gear motors can be categorized as spur gears, helical gears, or worm gears. These three types of gears have different torque capacities.
The first stage helical gear is the most important part of a gear motor. Its function is to transfer rotation from one gear to the other. Its output is the gearhead. The second stage gears are connected by a carrier. They work in tandem with the first stage gear to provide the output of the gearhead. Moreover, the first stage carrier rotates in the same direction as the input pinion.
Another important component is the output torque of the gearmotor. When choosing a gearmotor, consider the starting torque, running torque, output speed, overhung and shock loads, duty cycles, and more. It is crucial to choose a gearmotor with the right ratio for the application. By choosing the proper gearmotor, you will get maximum performance with minimal operating costs and increase plant productivity. For more information on first stage gears, check out our blog.
The first stage of a gear motor is composed of a set of fixed and rotating sprockets. The first stage of these gears acts as a drive gear. Its rotational mass is a limiting factor for torque. The second stage consists of a rotating shaft. This shaft rotates in the direction of the torque axis. It is also the limiting force for the motor’s torque.

China Electric 12 Volt DC 30-600rpm Transmission Worm Geared Gearbox Gear Reducer Motor     motor brushesChina Electric 12 Volt DC 30-600rpm Transmission Worm Geared Gearbox Gear Reducer Motor     motor brushes
editor by czh 2023-02-18

China 12v 24v 63mm high torque micro gear motor 60w with brush sliding door motor dc worm gear motor with Best Sales

Guarantee: 1 yr
Product Quantity: D63
Usage: BOAT, Vehicle, Electric Bicycle, Supporter, House Equipment, Industrial machines
Type: Equipment MOTOR
Torque: Customized
Building: Long lasting Magnet
Commutation: Brush
Protect Feature: Totally Enclosed
Pace(RPM): 80rpm
Continuous Current(A): 1A
Efficiency: IE four
Product Title: worm equipment motor
Noise Degree: Significantly less Than 60db
Quality Control System: ISO9001:2000
Shade: Black or in accordance to customer’s
High quality ensure: 1 yr
Certification: ce
Packaging Information: Export standard: Wood situation, Plywood circumstance, Carton box for sea & air freight
Port: HangZhou

Items Description

ModelBIOTEIdentifyDC Equipment motor
KindD63-80-80Power80w
Voltage180VDCRationsixty:1, Copper gear
Velocity80RPMTorque4N.m
Diameter63mmCertificationCE
Applicationwelding device, electrical home, CZPT machinery
BIOTE MOTORType: D63, D76, D80, D83-in accordance needed to personalized the electricity, votlage, pace. shaft sizeTechnical Info:1, Voltage: 12v, 24v, 36v. 48v, 90v, 180v, 10kw electric car package with motor controller lithium battery for sedan, golf cart, sightseeing bus 220v. DC Voltage2, Power: 15w, 25w, 30w, 35w, 45w, 50w, 60w, 80w, 90w, 120w, 200w, 300w, 500w.three, Speed: 20rpm-500rpmfour, Toque:4-8N.m, -according required to personalized far more huge torque5, Lengthy use time a lot more than thirty thousand hours6, Equipment: choose Copper and Plastic, 7, reduced Noise8, CB70 a variety of gearboxes gearhead Reducer Rotary Mower Tiller Cultivator Tractors Tiny Agricultural Gearboxes Can select encoder: 3ppr9, Gear ratio: 1:20, 1:28, 1:fifty six, 1:60, 10, Application: welding machine, electrical household, CZPT machinery, business office intelligent gear, hotel leisure, antomated equipment and so on. In depth Pictures Why Select Us WHY Select BIOTEA.Certificates handed:CE, ROSH tests handed for most of our motors and can supply stories.
B.Rapidly opinions for buyers:24 hrs reply for all customers’ inquiries. C. Competitive prices. D. Top quality assure:We have transported a lot motors to Italy, Spain, and other European and Usa buyers with substantial high quality.E. Quick and Timely shipping and delivery:Usually 10-fifteen times for merchandise creation.F. Skilled Technological support and After-sale provider.G.Customized support for sort of motor according to your requirement.
Packing & Shipping Our Organization WorkshopStamping Equipment, CNC-Equipment, Vacuum Force Impregnating, Sizzling sale cast iron 1 groove 3.15 inch outside diameter BK30 type v-belt sheave pulley for 4L AB 5L belts Plating Equipment. and so on.
Application FAQ Q1: What kind motors you can supply?A1: For now, we mostly provide permanent magnet brush dc motors, brushless dc motor, dc equipment motor, micro dc motor, ac equipment motor, planetary equipment motor, with diameter assortment in 42~110mm. NEMA dc motor. NEMA dc Motor. stainless steel motor
Q2: Is there a MOQ for your motors?A2: No. we can take 1 pcs for sample generating for your tests,and the price for sample creating will have thirty% to 50% variation based mostly on distinct type.
Q3: Could you send out me a cost listing?A3: For all of our motors, they are personalized dependent on different demands like electricity, voltage, gear ratio, rated torque and shaft diameter etc. The price also differs according to various buy qty. So it is truly difficult for us to supply a cost listing. If you can share your detailed specification and get qty, we’ll see what provide we can offer.
Q4: Are you motors reversible?A4: Sure, virtually all dc and ac motor are reversible. We have specialized folks who can teach how to get the perform by distinct wire relationship.
Q5:How about your shipping and delivery time? A5: For micro brush dc equipment motor, the sample shipping and delivery time is 2-5 times, bulk delivery time is about 15-20 days, relies upon on the buy qty. For brushless dc motor, the sample provide time is about 10-15 times 1200W 48v 60v 72v BM1424HQF Brushless DC Long lasting Magnet Differential Motor for Electric powered Tricycle ATV Mini Auto Motor bulk time is 15-20 days.You should take the income confirmation for last reference.

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China 12v 24v 63mm high torque micro gear motor 60w with brush sliding door motor dc worm gear motor     with Best SalesChina 12v 24v 63mm high torque micro gear motor 60w with brush sliding door motor dc worm gear motor     with Best Sales
editor by czh2023-02-15

China Hollow Shaft Reducer Grooved Eccentric Worm Gear Fat Reducing Machine Planetary Concentr Pressure Valve Gel Fat Blood Electric Motor motor driver

Product Description

     Hollow Shaft Reducer Grooved Eccentric Worm Gear Fat Reducing Machine Planetary Concentr Pressure Valve Gel Fat Blood Electric Motor

US $10-99
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

US $10-99
/ Piece
|
100 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Soft Tooth Surface
Installation: 90 Degree
Layout: Coaxial
Gear Shape: Conical – Cylindrical Gear
Step: Stepless

###

Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

Benefits of a Planetary Motor

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!
Motor

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.
Motor

Encoder

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.
Motor

Cost

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.

China Hollow Shaft Reducer Grooved Eccentric Worm Gear Fat Reducing Machine Planetary Concentr Pressure Valve Gel Fat Blood Electric Motor     motor driver	China Hollow Shaft Reducer Grooved Eccentric Worm Gear Fat Reducing Machine Planetary Concentr Pressure Valve Gel Fat Blood Electric Motor     motor driver
editor by czh 2022-12-12

China 8 Phase High Torque Brushless DC Worm Planetary Gear Motor manufacturer

Product Description

Quiet, stable and reliable for long life operation
1.Diameters: 57mm
2.Lengths:  56mm;76mm;96mm;116mm
3.Continuous torques: 0.15Nm;0.30Nm;0.45Nm;0.60Nm
4.Power: 46W;92W;134W;168W
5.Speeds up to 4000rpm;4000rpm;4000rpm;4000rpm
6.Environmental conditions: -10~+40°C
7.Number of poles/phase:4/3
8.Mangnet material:Bonded NdFeB
9.Insulation class:B
10.Optional: electronic drivers, encoders and gearheads, as well as Hall effect resolver and sensorless feedback
11.We can design the special voltage and shaft, and so on

Model 57ZWX01 57ZWX02 57ZWX03
Voltage V 36
No load speed rpm 5200 5200 5200
Rated torque Nm 0.11 0.22 0.32
Rated speed rpm 4000 4000 1000
Rated current A 1.9 3.30  4.8 
Torque(max) Nm 0.30  0.55 0.80 
At Torque(max)Current A 4.5 7.4  9.5
Rotor inertia Kgmm² 7.5 11.9 17.3
Back-EMF constant V/krpm 4.5 4.82 4.87
Torque Constant Nm/A 0. 0571 0.0787 0.080 
Resistance(20ºC) ohm 4.65 0.70  0.48
Weight Kg 0.50  0.75 1.00 
L1 mm 56 76 96
Rotor:La mm 20 40 60

Normal type of shaft

 

US $15
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Medical Equpiments
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Driving
Number of Poles: 4
Structure and Working Principle: Brushless

###

Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model 57ZWX01 57ZWX02 57ZWX03
Voltage V 36
No load speed rpm 5200 5200 5200
Rated torque Nm 0.11 0.22 0.32
Rated speed rpm 4000 4000 1000
Rated current A 1.9 3.30  4.8 
Torque(max) Nm 0.30  0.55 0.80 
At Torque(max)Current A 4.5 7.4  9.5
Rotor inertia Kgmm² 7.5 11.9 17.3
Back-EMF constant V/krpm 4.5 4.82 4.87
Torque Constant Nm/A 0.0735 0.0787 0.080 
Resistance(20ºC) ohm 4.65 0.70  0.48
Weight Kg 0.50  0.75 1.00 
L1 mm 56 76 96
Rotor:La mm 20 40 60
US $15
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Universal, Industrial, Household Appliances, Car, Power Tools, Medical Equpiments
Operating Speed: Constant Speed
Excitation Mode: Compound
Function: Driving
Number of Poles: 4
Structure and Working Principle: Brushless

###

Samples:
US$ 15/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model 57ZWX01 57ZWX02 57ZWX03
Voltage V 36
No load speed rpm 5200 5200 5200
Rated torque Nm 0.11 0.22 0.32
Rated speed rpm 4000 4000 1000
Rated current A 1.9 3.30  4.8 
Torque(max) Nm 0.30  0.55 0.80 
At Torque(max)Current A 4.5 7.4  9.5
Rotor inertia Kgmm² 7.5 11.9 17.3
Back-EMF constant V/krpm 4.5 4.82 4.87
Torque Constant Nm/A 0.0735 0.0787 0.080 
Resistance(20ºC) ohm 4.65 0.70  0.48
Weight Kg 0.50  0.75 1.00 
L1 mm 56 76 96
Rotor:La mm 20 40 60

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China 8 Phase High Torque Brushless DC Worm Planetary Gear Motor     manufacturer China 8 Phase High Torque Brushless DC Worm Planetary Gear Motor     manufacturer
editor by czh 2022-11-30

China best K series speed reducer with motor servo worm gearbox agricultural machinery gearboxes worm drive gearbox power transmission worm gear winch

Warranty: 1 year
Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops
Weight (KG): 45 KG
Gearing Arrangement: Helical
Output Torque: 105 (WhatsApp & Wechat)

Spiral Gears for Right-Angle Right-Hand Drives

Spiral gears are used in mechanical systems to transmit torque. The bevel gear is a particular type of spiral gear. It is made up of two gears that mesh with one another. Both gears are connected by a bearing. The two gears must be in mesh alignment so that the negative thrust will push them together. If axial play occurs in the bearing, the mesh will have no backlash. Moreover, the design of the spiral gear is based on geometrical tooth forms.
Gear

Equations for spiral gear

The theory of divergence requires that the pitch cone radii of the pinion and gear be skewed in different directions. This is done by increasing the slope of the convex surface of the gear’s tooth and decreasing the slope of the concave surface of the pinion’s tooth. The pinion is a ring-shaped wheel with a central bore and a plurality of transverse axes that are offset from the axis of the spiral teeth.
Spiral bevel gears have a helical tooth flank. The spiral is consistent with the cutter curve. The spiral angle b is equal to the pitch cone’s genatrix element. The mean spiral angle bm is the angle between the genatrix element and the tooth flank. The equations in Table 2 are specific for the Spread Blade and Single Side gears from Gleason.
The tooth flank equation of a logarithmic spiral bevel gear is derived using the formation mechanism of the tooth flanks. The tangential contact force and the normal pressure angle of the logarithmic spiral bevel gear were found to be about twenty degrees and 35 degrees respectively. These two types of motion equations were used to solve the problems that arise in determining the transmission stationary. While the theory of logarithmic spiral bevel gear meshing is still in its infancy, it does provide a good starting point for understanding how it works.
This geometry has many different solutions. However, the main two are defined by the root angle of the gear and pinion and the diameter of the spiral gear. The latter is a difficult one to constrain. A 3D sketch of a bevel gear tooth is used as a reference. The radii of the tooth space profile are defined by end point constraints placed on the bottom corners of the tooth space. Then, the radii of the gear tooth are determined by the angle.
The cone distance Am of a spiral gear is also known as the tooth geometry. The cone distance should correlate with the various sections of the cutter path. The cone distance range Am must be able to correlate with the pressure angle of the flanks. The base radii of a bevel gear need not be defined, but this geometry should be considered if the bevel gear does not have a hypoid offset. When developing the tooth geometry of a spiral bevel gear, the first step is to convert the terminology to pinion instead of gear.
The normal system is more convenient for manufacturing helical gears. In addition, the helical gears must be the same helix angle. The opposite hand helical gears must mesh with each other. Likewise, the profile-shifted screw gears need more complex meshing. This gear pair can be manufactured in a similar way to a spur gear. Further, the calculations for the meshing of helical gears are presented in Table 7-1.
Gear

Design of spiral bevel gears

A proposed design of spiral bevel gears utilizes a function-to-form mapping method to determine the tooth surface geometry. This solid model is then tested with a surface deviation method to determine whether it is accurate. Compared to other right-angle gear types, spiral bevel gears are more efficient and compact. CZPT Gear Company gears comply with AGMA standards. A higher quality spiral bevel gear set achieves 99% efficiency.
A geometric meshing pair based on geometric elements is proposed and analyzed for spiral bevel gears. This approach can provide high contact strength and is insensitive to shaft angle misalignment. Geometric elements of spiral bevel gears are modeled and discussed. Contact patterns are investigated, as well as the effect of misalignment on the load capacity. In addition, a prototype of the design is fabricated and rolling tests are conducted to verify its accuracy.
The three basic elements of a spiral bevel gear are the pinion-gear pair, the input and output shafts, and the auxiliary flank. The input and output shafts are in torsion, the pinion-gear pair is in torsional rigidity, and the system elasticity is small. These factors make spiral bevel gears ideal for meshing impact. To improve meshing impact, a mathematical model is developed using the tool parameters and initial machine settings.
In recent years, several advances in manufacturing technology have been made to produce high-performance spiral bevel gears. Researchers such as Ding et al. optimized the machine settings and cutter blade profiles to eliminate tooth edge contact, and the result was an accurate and large spiral bevel gear. In fact, this process is still used today for the manufacturing of spiral bevel gears. If you are interested in this technology, you should read on!
The design of spiral bevel gears is complex and intricate, requiring the skills of expert machinists. Spiral bevel gears are the state of the art for transferring power from one system to another. Although spiral bevel gears were once difficult to manufacture, they are now common and widely used in many applications. In fact, spiral bevel gears are the gold standard for right-angle power transfer.While conventional bevel gear machinery can be used to manufacture spiral bevel gears, it is very complex to produce double bevel gears. The double spiral bevel gearset is not machinable with traditional bevel gear machinery. Consequently, novel manufacturing methods have been developed. An additive manufacturing method was used to create a prototype for a double spiral bevel gearset, and the manufacture of a multi-axis CNC machine center will follow.
Spiral bevel gears are critical components of helicopters and aerospace power plants. Their durability, endurance, and meshing performance are crucial for safety. Many researchers have turned to spiral bevel gears to address these issues. One challenge is to reduce noise, improve the transmission efficiency, and increase their endurance. For this reason, spiral bevel gears can be smaller in diameter than straight bevel gears. If you are interested in spiral bevel gears, check out this article.
Gear

Limitations to geometrically obtained tooth forms

The geometrically obtained tooth forms of a spiral gear can be calculated from a nonlinear programming problem. The tooth approach Z is the linear displacement error along the contact normal. It can be calculated using the formula given in Eq. (23) with a few additional parameters. However, the result is not accurate for small loads because the signal-to-noise ratio of the strain signal is small.
Geometrically obtained tooth forms can lead to line and point contact tooth forms. However, they have their limits when the tooth bodies invade the geometrically obtained tooth form. This is called interference of tooth profiles. While this limit can be overcome by several other methods, the geometrically obtained tooth forms are limited by the mesh and strength of the teeth. They can only be used when the meshing of the gear is adequate and the relative motion is sufficient.
During the tooth profile measurement, the relative position between the gear and the LTS will constantly change. The sensor mounting surface should be parallel to the rotational axis. The actual orientation of the sensor may differ from this ideal. This may be due to geometrical tolerances of the gear shaft support and the platform. However, this effect is minimal and is not a serious problem. So, it is possible to obtain the geometrically obtained tooth forms of spiral gear without undergoing expensive experimental procedures.
The measurement process of geometrically obtained tooth forms of a spiral gear is based on an ideal involute profile generated from the optical measurements of one end of the gear. This profile is assumed to be almost perfect based on the general orientation of the LTS and the rotation axis. There are small deviations in the pitch and yaw angles. Lower and upper bounds are determined as – 10 and -10 degrees respectively.
The tooth forms of a spiral gear are derived from replacement spur toothing. However, the tooth shape of a spiral gear is still subject to various limitations. In addition to the tooth shape, the pitch diameter also affects the angular backlash. The values of these two parameters vary for each gear in a mesh. They are related by the transmission ratio. Once this is understood, it is possible to create a gear with a corresponding tooth shape.
As the length and transverse base pitch of a spiral gear are the same, the helix angle of each profile is equal. This is crucial for engagement. An imperfect base pitch results in an uneven load sharing between the gear teeth, which leads to higher than nominal loads in some teeth. This leads to amplitude modulated vibrations and noise. In addition, the boundary point of the root fillet and involute could be reduced or eliminate contact before the tip diameter.

China best K series speed reducer with motor servo worm gearbox agricultural machinery gearboxes worm drive gearbox power transmission     worm gear winchChina best K series speed reducer with motor servo worm gearbox agricultural machinery gearboxes worm drive gearbox power transmission     worm gear winch

in Nakhon Pathom Thailand sales price shop near me near me shop factory supplier 12V-24V 50rpm 100W DC Right-Angle Worm Gear Motor with Reducer Nmrv025, 030, 040 and 050 manufacturer best Cost Custom Cheap wholesaler

  in Nakhon Pathom Thailand  sales   price   shop   near me   near me shop   factory   supplier 12V-24V 50rpm 100W DC Right-Angle Worm Gear Motor with Reducer Nmrv025, 030, 040 and 050 manufacturer   best   Cost   Custom   Cheap   wholesaler

Superior thermo therapy equipment, this kind of as network warmth treatment method oven, multi-use thermo remedy oven, etc. It has proven steady cooperation with several nicely recognized universities and institutes in china such as, Zhejiang University, Jilin University, Specialized committee of nationwide chain drive regular, Institute of national chain drive, Zhejiang application engineering materials institute, Huhan content security institute and it cooperated to identified China Very first Auto chain institute with National chain travel institute. The new items contain a collection of substantial-tech and high top quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator step-chains, large-pace tooth chains, timing chains, self-lubrication chains, between which have sort substantial velocity tooth chain for vehicle department dynamic box and aerial chains fill in the blanks of chain in China. We are 1 OEM EPT for a variety of worm-EPT motors, worm EPT EPEPT, clay target trap EPEPT, ATA entice EPEPT, EPTTing golf trolleEPTTmotor, NMRV worm EPT motor on digital jigging fishing genuine, dump EPT tarp motor, dump EPT EPT motor, poEPTTng concrete ground motor, pedestrian pallet EPT motor and many others

1. EPT type: Everlasting magnet DC
2. Rated velocity: 1500rpm-5000rpm
three. Defense: IP44, IP55, IP66
four. Voltage: 12V, 24V
5.EPT Ratio: 30:one, fifty:1, 60:one, 75:1
six.Output speed: 35rpm-45rpm, 40rpm-45rpm, 70-80rpm, 100rpm-120rpm, 160rpm-180rpm
seven. Output EPTT: 320W, 380W, 500W, 750W, 1000W
8. EPTT: worm and wheel
9. Insulation: Course F
ten. Efficiency: 65%

Product Voltage EPTT present torque output pace Reduction ratio
300W-LST90-Q 12V/24V 300W 40A, 20A 22.5N.m 50rpm,100rpm i=50:one, 30:one
300W-LST90-08 12V/24V 245W 50A 22.5N.m-60N.m 75rpm i=fifty:one, 25:1
12V/24V 300W 70 N.m 40rpm i=fifty:1, twenty five:one
240W-LST80-Y 12V/24V 240W 25A 22N.m-40N.m 90rpm i=fifty:1, 25:1
130W-LST73-AS 48V 130W 4A seven N.m 88 rpm i=fifty:one
130W 4A 11 N.m fifty five rpm i=forty:one
320W-LST73-08 12V/24V 320W 45A 36N.m,30N.M 42rpm,62rpm i=fifty:1, 25:1
LST63 12V 20W 5A two.3N.m 83rpm i=seven,i=ten,i=fifteen, i=36
12V 43W 11A four.3N.m 94rpm i=7,i=ten,i=fifteen, i=36
24V 20W two.5A two.3N.m 83rpm i=7,i=10,i=fifteen, i=36
24V 43W five.5A four.3N.m 94rpm i=7,i=ten,i=15, i=36
20V 50W 5A two.4N.m 200rpm i=7,i=ten,i=fifteen, i=36
60V 50W two.5A two.4N.m 200rpm i=seven,i=ten,i=15, i=36
LST90-thirteen 12V/24V 300W 36N.m 36rpm-41rpm i=134:1
Wheelchair motor 24V 200W-260W 24.5A 24N.m 120rpm i=32:1
350W-LST80-W 12V/24V 240W-350W 30A 30N.m-45N.m 43rpm,70rpm i=sixty:1

Our Main variety of DC motors and EPTTes are particularly created to be interchangeable and functional, this assists us preserve reduce stock amounts while achieving the customization necessary for so numerous applications. The core offer has also enabled us to offer you excellent pricing stages for minimal quantities, frequently prototypes are very pricey owing to absence of economies of scale we have attempted to aid with this as significantly as attainable. HangEPT EPT can offer bespoke models for greater portions and offer you a EPT EPTT services in which we function carefully with our customers to identify the optimal supply routine in accordance with OEM production levels. If you are looking for DC motors and EPTTes you have arrive to the rigEPTT spot, our skilled technical sales employees will recommend the greatest possible alternative for equally your application and your pocket. Speak to us now to examine your application.

EPT EPT Connected Solutions IncEPTT:
#8226We can give AC, DC motors and motor EPTT combos up to 3000W and 250nm for small and huge orders.
#8226We EPT bespoke deisgns for orders over 1000 models.
#8226We deliver amp source on time (In accordance to rigid OEM production Schedules)
#8226We generate motors to your technical specs
#8226Our models endure arduous functionality and software tests before dispatch
#8226We support consumers with the design of purposes
#8226We maintain numerous motor spares

Why You Should Use EPT For Your EPT Requirments?
#8226Extensive Selection
#8226Manufactured to Spec
#8226Able to deal with any dimension orEPTTlarge or small
#8226EPT Manufacturing facility Capability
#8226EPTtity Special discounts

HangEPT EPT EPT EPTT, LTD is responsible for exporting the over goods, and we also EPTT some EPTTant products from oversea markets.
Our company has received the rigEPTT of EPTT and export from the Authorities department.
It is necessary to get your specific requirement when making contact with us, for instance of motor, voltage, EPTT, speed, output torque, connecting sort and measurement of shaft, outside composition drawing or pertinent photos and so on. And then we will give the exact delivers.
As a result, hope to get your opinions soon.

  in Nakhon Pathom Thailand  sales   price   shop   near me   near me shop   factory   supplier 12V-24V 50rpm 100W DC Right-Angle Worm Gear Motor with Reducer Nmrv025, 030, 040 and 050 manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Nakhon Pathom Thailand  sales   price   shop   near me   near me shop   factory   supplier 12V-24V 50rpm 100W DC Right-Angle Worm Gear Motor with Reducer Nmrv025, 030, 040 and 050 manufacturer   best   Cost   Custom   Cheap   wholesaler